EcoBell Cleaner D2 offers a fully automated solution for cleaning atomizers. Dürr received two awards for this innovative product.

Benchmark in environmental footprint and production efficiency

Dürr receives three awards at the SURCAR international awards in Shanghai

Shanghai, November 2016 – During its first International Awards Ceremony in China SURCAR presented awards for 13 projects from both Automotive OEMs and suppliers. With three awards, Dürr achieves very great success at the ceremony in Shanghai. In the category “Environmental Footprint” the new atomizer cleaner EcoBell Cleaner D2 received two awards. Also rewarded was the BMW Brilliance Tiexi Paintshop in the category "Start up and Commissioning – Greenfield Project", which was built by Dürr. 

The 13 projects rewarded at the SURCAR International Awards amongst the four categories (Environmental Footprint, Customer driven Quality Achievement, Lean, Plant and Process Design, Start Up and Commissioning) perfectly reflect these orientations for the future.

In the category “Environmental Footprint” the awards were given to distinguish project teams who managed to respect new environmental regulations by reducing VOC Emissions, reduced energy consumption and sustainable waste treatment in the paint shop.

Solvent use reduced

Dürr’s EcoBell Cleaner D2 received the awards for the subcategory “Technological Innovation” as well as for “Paint Consumption”. The cleaner offers a fully automated solution for cleaning atomizers. It reduces solvent use for each cleaning cycle to just 50 ml, from a previous 500 ml. This way, by reducing solvent waste, it prevents much VOCs from entering the booth air, thus reducing VOC emissions.

The EcoBell Cleaner D2’s greatest strength is that it can simultaneously perform both external cleaning and internal rinsing. Cleaning takes just 15 seconds to complete and occurs during the normally unproductive paint load-time—true time efficiency at work!

A third award Dürr received in the category "Start up and Commissioning – Greenfield Project" together with BMW and Schiller-Group for the BMW Brilliance Tiexi Paintshop. The paint shop, which was built by Dürr in Shenyang, set the benchmark in recent years in environmental footprint and production efficiency. The Schiller-Group is specialist for warehouse technology and logistics.

Dürr’s sales manager Jin Xuefeng received two SURCAR International Awards in the category “Environmental Footprint”.

SURCAR is the largest worldwide community in paint and car body finishing. Die SURCAR International Awards is the biennial ceremony which will reward the most innovative solutions for car body painting and allied paint finishing industries and enhance the public exposure of companies, OEMs and suppliers, involved in the continuous development of the paint finishing industries. The projects can be based in any manufacturing plant worldwide, but linked or showing advantages for and applicable to the Asian market are very much appreciated.

Jin Xuefeng, sales manager of Dürr in China, received the awards and said: "With our vision of leading in production efficiency, Dürr has always been dedicated in technology innovation and in environment protection. This meets the purpose of SURCAR award ceremony. We are looking forward to developing paint technology for future markets."

Your contact: Jin (Kevin) Xuefeng

Shop floor meets IT
At the cutting edge of autonomous driving
A unique combination that is ready-to-use
Go and See – Practical relevance is the lifeblood of successful project management
Increasing system availability with smart services
Laser scanning for optimized processes in brownfield projects
Dürr receives Ford Motor Company´s World Excellence Award again
Smart control technology makes new Dürr robots even more powerful and well-prepared for Industry 4.0
New local service: extensive opportunities for product testing and training
Maximum production efficiency in the age of Industry 4.0
A high-efficiency bumper paint shop by Dürr
Robot supports workers precisely and reliably
First time installation of Dürr’s EcoDry X technology
Distinctions for handling and quality
A paint shop that can fit through a door
Dürr acquires KBA-CleanAir
New generation of robots from Dürr: More versatile painting through additional movement options
Digital maintenance assistant from Dürr increases plant availability
“Digitization has gained great momentum”
New addition to the EcoBell3 family
A focused and accurate detection of flaws with EcoReflect
Tailor-made solutions for dry separation
Intermediate oven with CO2 heat pump: cost-efficient and environment-friendly
Dürr Supplier Award presented for second time
Smart products and networked factories
Smart product: Green: all ok, yellow: maintenance required, red: replace pump immediately
Smart Factory: EcoScreen 3D-OnSite – increased performance and speed
Smart service: Digital fingerprint enables targeted troubleshooting
Optimizing production worldwide
Benchmark in environmental footprint and production efficiency
Dürr sells 2,000th sealing robot
More space for testing and filling technology
Dürr opens new US campus
Accurate testing for reproducible quality
Geely Excellent Supplier Award
The best customized modification
Thank you for your positive feedback and your ideas!
Reliable tracking in a complex production process
Finding the most economical solution together
Dürr modernizes paint shop in China in record time
Groundbreaking ceremony for the new Dürr China site
Meeting stricter emission standards in China with Dürr's exhaust-air purification systems
Efficiency in practice: upgrade, commissioning and performance test in 25 days
The 10,000th Dürr robot is heading to Spain
x-DASalign ensures safety
Innovation awareness and management qualities
EcoShot Meter: a piston dosing system for many types of application
Volvo Group Trucks presents Dürr with supplier award
Higher energy efficiency thanks to turbine with optimized compressed-air consumption
Economical and modern methods of gas and liquid waste treatment
Energy on demand for the oven
Human and robot operate directly as colleagues for tank fitting
Dürr test stands increasingly growing in importance – even for “autonomous driving”
EcoGun2 3D is more compact and lighter with minimum pressure loss
EcoEMOS SCADA increases the efficiency of the entire production process
Dürr is on the right track in Russia
Automated water-based paint application: high efficiency in interior painting
Nǐhǎo, commercial vehicle manufacturers
Schenck RoTec expands range of balancing equipment in China
Dürr service hotline: competent support 24/7
EcoEMOS Andon supervisory control system optimizes the assembly line in automotive production
CARDANO: ease of operation, fast processes, high process reliability
Dürr creates state-of-the-art paint shop on the Indian market
World’s largest ventilation air methane/coal mine methane oxidation project goes live
Innovation in atomizer cleaning
Two partners – one goal
Dürr EcoEMOS software for all production areas
Dürr presents its "Industrial Products"
Producing wheels ready for installation – with high process reliability and maximum flexibility
CO2 refrigerant provides sustainability and security of investment
Dürr selected as strategic partner
State-of-the-art test stand for pumps from Dürr
Specially developed for the Asian market
"Greenfield projects are the 'compulsory' program, while brownfield projects are 'freestyle'"
EcoSupply P: Minimum paint loss through piggable paint supply systems
Dürr opens sixth training center for paint systems
Always a big step ahead with adapters from Dürr Somac
Dürr China extends test and training facilities
First concentrate, then purify
One supervisory control system – many functions
First accredited testing laboratory for balancing equipment worldwide
Thanks to ORC equipment: geothermal power station becomes more efficient
Joint creation of local paint standards
Dürr robots qualify for the Korean market
Higher efficiency with minimum cleaning
Operating costs reduced and disposal costs eliminated
Contribution to an environmental-friendly production
Perfect alignment prior to final vehicle assembly
Precise conveyor technology for complex oil spray system
Fully redesigned – presenting the new CABflex3
Dürr sets up new "Industrial Products" area
Innovations in application technology
Ferrari records a higher production output after RoDip conversion in Maranello
Demonstrating innovative skill
Balancing crankshafts efficiently and conveniently with BARIO
EcoC-IC oven – for targeted use of heat
Software for paint shops revised
2014 Most Honored Automotive Paintshop Supplier
EcoReBooth saves space while reducing material consumption and costs
Dürr provides a good basis
For fast, precise interior painting
Dürr opens technology center in Tokyo
New test center for handling doors and hoods
Paint separation – one step ahead
x-DASalign – precision and safety
Technologies with excellent energy efficiency
Dürr provides network for commercial vehicle community
Exhaust-air purification in China: Dürr has the right systems
Space-saving design and low energy consumption
Scania continues to rely on powder paint and Dürr as a partner
Continuously improving processes
thermea heat pumps for five-star hotel
Dürr receives Daimler Supplier Award
Dürr opens new mechanical engineering site in Shanghai
Award for Eco+Paintshop in China
Eco+Paintshop: established products and new technologies
TIIS certification for Dürr robots in Japan
Lowering energy costs and emissions
Electro-coating of a different kind
A leap in high-pressure technology
Flexible, fast, and energy-efficient
Automatic interior painting in just nine days
And the awards go to ... Dürr Shanghai!
Tailored closer to customers' needs
Cost savings in paint usage and maintenance requirements
Dürr Somac filling systems for commercial vehicles, too
The new generation of solvent-based cleaning systems
Dürr presented products to meet your needs
New generation Ecopaint RoDip E
New robotized cleaning system
Valuable advantages for customers
x-wheel truck d goes to America
High flexibility and short start-up period
Dürr in Turkey: Not only painting cars
Efficiency and quality in the painting process
Teaching filling technology know-how all over the world
Standardized software for flexible conveyor technology
"Supplier of the Year 2012"
German engineering – high-quality built in India
President congratulates Dürr
Fast fault analysis and speedy troubleshooting
New location in Shanghai: service and local product development expanded
Innovations for end-of-line testing
Environmental protection goes global
CIC ovens: the world's first use in truck manufacturing
Cleanliness is a key quality factor for more competitive edge
Faster and more accurate glue application
New chassis geometry measurement system
One-stop solution designed and built in-house
Dürr China expands production capacity
Environmentally friendly refrigerant requires investment
From micro gas turbines to heat exchangers
New machines for the Chinese market
Faster results in cleanliness testing
From zero to 100 percent production within just four days
High demand for innovative paint booth concept
Economical and quick to use
For excellent performance at the VW factory in Puebla
The EcoCBase W3 covers a wide range of cleaning tasks
A new perspective for sustainable painting
Distec makes small series economically feasible
Coated in premium quality at reduced unit costs
Simple and efficient cleansing of process bath fluids