Color changers and metering pumps are available on robotic arms for training courses.

All about painting, gluing and sealing

Dürr opens state-of-the-art test and training center in Shanghai

Shanghai, December 2017 – The newly opened Dürr location in Shanghai offers a leading edge environment for over 1,000 employees on a 20,000 m² property. In the test and training center car manufacturers can comprehensively test Dürr technologies for painting, gluing, and sealing with their own car bodies before they go into mass production. There is also a practically oriented training portfolio. The new location in China brings the total number of test and training centers available to Dürr customers worldwide to seven.

In addition to the test series conducted by Dürr as part of its own research and development, car manufacturers can work with their own products in the test center to check processes for their practicability and improve production results in advance. This applies, for example, to the RoDip rotational dip process, which is used in pretreatment and cathodic electrocoating. With RoDip, the vehicle is rotated once around its own axis in the tank to optimize the immersion, flooding, and dripping off processes. Even though more than ten million bodies worldwide are coated using RoDip each year, this technology is constantly being enhanced. One aspect of this enhancement is customer-specific immersion tests for testing the body rigidity.

In addition, the test center has the latest application technology for using water- and solvent-based paints. It uses the third robot generation from Dürr with the EcoRP E133i models, which operate on a rail and can thus be used to test a wide variety of different painting applications. The new, optimized control system allows the robot to follow smooth and harmonious paths over the body. The painting robots are equipped with the high-speed rotary atomizers from the EcoBell3 family. This enables painting concepts to be tested with water- or solvent-based paints, both for plastic parts and for interior and exterior painting of the car bodies.

After the paint has been applied, it is cured in an oven. The Ecopaint Oven product family ensures perfect surfaces and enables recording and verification of the optimum drying process, thanks to a wide range of simulations. Dryer modules from Dürr that are also in the oven in the test center offer optimized complete systems for the customer with the combination of tunnel and heat exchangers, sealing air, heating units with recirculated air and exhaust gas recirculation, fresh air supply, heating, exhaust air purification, cooling zones, and conveyor technology.

Directly following the oven is the new EcoReflect light tunnel for inspecting the quality of painted surfaces. With an innovative light concept and a perfectly ergonomic environment design, it delivers precise and highly focused vision. This permits continuous detection of irregularities in paint with maximum accuracy.

The training courses are practically oriented.

There are also three sealing robots equipped with the latest application technology. In the cells, fully automatic processes for highly effective sealing of welding seams and coating of underbody and rocker panels can be tested directly on customers' bodies. Other stations deal with automated gluing techniques in body construction and in final assembly.

Fully equipped training center

The separate training center has several fully equipped training rooms and a technical area with four painting robots from the EcoRP series. EcoLCC2 color changers and EcoPump9 metering pumps are also available on robotic arms for training courses. Two stations equipped with EcoScreen and EcoScreen 3D-Onsite provide an opportunity to practice with digital solutions as part of an Industry 4.0 platform. With EcoScreen, Dürr offers a one-size-fits-all solution for visualization in the automotive industry. EcoScreen 3D-OnSite is a 3D visualization and programming software that can be used to generate robot programs, parameterize the associated process data, and simulate the entire robot cell. In addition, all training modules can be individually tailored to customer requirements.

The permanent training team is comprised of engineers, technicians, electricians, robot programmers, and process managers. This expertise provides the basis for a wide range of project- and customer-specific courses, which are held in Chinese and English. The course program is aimed at maintenance personnel, plant operators, programmers, executives, and planning teams. The participants not only learn how to correctly operate standard robots but also gain extensive know-how about application technology, as well as special technical aspects, such as the electrical maintenance of plants. This newly acquired knowledge is consolidated with practical exercises on servicing, preventive maintenance, and troubleshooting.

Your contact: Liao Rong

EcoInCure: A revolution in car body drying
Equipped for the Industry 4.0 environment
Smart, flexible and easy to use
iTAC.MES.Suite – Synergies for the production of the future
Trained employees ensure quality
High-quality modifications
Modular and automated
Energized and ever ready
Tried and tested for many decades
Smart, safe and precise
All about painting, gluing and sealing
The 1,000th EcoBell Cleaner D2 will be Mexican
Keeping high-speed trains looking their best
Big quality for small parts
Cutting operating costs and saving resources
"We combine digitization know-how with industry expertise"
Innovative body drying from the inside
Autonomous driving brings major changes to end-of-line technology
Increased system operation efficiency with digital documentation
Painting processes optimized before the start of production
Reducing cycle times and investment with the right nozzle
Perfectly integrated, process optimized
Optimized emission values and reduced consumption of resources
Dürr wins visionary new product award
Dürr is „Global Champion“
Shop floor meets IT
At the cutting edge of autonomous driving
A unique combination that is ready-to-use
Go and See – Practical relevance is the lifeblood of successful project management
Increasing system availability with smart services
Laser scanning for optimized processes in brownfield projects
Combining skills at one location
Dürr receives Ford Motor Company´s World Excellence Award again
Smart control technology makes new Dürr robots even more powerful and well-prepared for Industry 4.0
Maximum production efficiency in the age of Industry 4.0
Robot supports workers precisely and reliably
First time installation of Dürr’s EcoDry X technology
Integrated balancing solution using laser measuring technology
A paint shop that can fit through a door
Dürr acquires KBA-CleanAir
New generation of robots from Dürr: More versatile painting through additional movement options
Digital maintenance assistant from Dürr increases plant availability
“Digitization has gained great momentum”
New addition to the EcoBell3 family
A focused and accurate detection of flaws with EcoReflect
Tailor-made solutions for dry separation
Intermediate oven with CO2 heat pump: cost-efficient and environment-friendly
Dürr Supplier Award presented for second time
Smart products and networked factories
Smart product: Green: all ok, yellow: maintenance required, red: replace pump immediately
EcoScreen 3D-OnSite: increased performance and speed
Digital fingerprint enables targeted troubleshooting
Optimizing production worldwide
Dürr sells 2,000th sealing robot
Accurate testing for reproducible quality
Dürr opens new US campus
The best customized modification
Thank you for your positive feedback and your ideas!
Reliable tracking in a complex production process
Machine duo impresses in the workshop
Finding the most economical solution together
Faster service for Korean automotive industry
Dürr modernizes paint shop in China in record time
Experiencing and understanding technology
The 10,000th Dürr robot is heading to Spain
x-DASalign ensures safety
Meeting stricter emission standards in China with Dürr's exhaust-air purification systems
EcoShot Meter: a piston dosing system for many types of application
High-speed balancing now also available as a service
Volvo Group Trucks presents Dürr with supplier award
Higher energy efficiency thanks to turbine with optimized compressed-air consumption
Energy on demand for the oven
Human and robot operate directly as colleagues for tank fitting
Dürr test stands increasingly growing in importance – even for “autonomous driving”
Precision work on the ground floor
EcoGun2 3D is more compact and lighter with minimum pressure loss
EcoEMOS SCADA increases the efficiency of the entire production process
Speeding up spare parts delivery
Dürr is on the right track in Russia
Testing the burners of exhaust-air purification systems under live conditions
Three metropolises and huge emotions
Automated water-based paint application: high efficiency in interior painting
Dürr service hotline: competent support 24/7
EcoEMOS Andon supervisory control system optimizes the assembly line in automotive production
CARDANO: ease of operation, fast processes, high process reliability
Dürr creates state-of-the-art paint shop on the Indian market
World’s largest ventilation air methane/coal mine methane oxidation project goes live
Innovation in atomizer cleaning
Producing wheels ready for installation – with high process reliability and maximum flexibility
Dürr EcoEMOS software for all production areas
CO2 refrigerant provides sustainability and security of investment
Dürr presents its "Industrial Products"
Energy and heat from wood-based residues
Dürr selected as strategic partner
State-of-the-art test stand for pumps from Dürr
"Greenfield projects are the 'compulsory' program, while brownfield projects are 'freestyle'"
Always a big step ahead with adapters from Dürr Somac
EcoSupply P: Minimum paint loss through piggable paint supply systems
Dürr offers promising combination
Dürr opens sixth training center for paint systems
Tailor-made: balancing system for roller manufacturing
Dürr creates further testing and training opportunities
One supervisory control system – many functions
First accredited testing laboratory for balancing equipment worldwide
Dürr web shop for "Industrial Products" online
First concentrate, then purify
Thanks to ORC equipment: geothermal power station becomes more efficient
Dürr robots qualify for the Korean market
Dürr sets up new "Industrial Products" area
Perfect alignment prior to final vehicle assembly
Higher efficiency with minimum cleaning
G3 Blue is faster, lighter and more ergonomic
“Dürr´s focus is on increasing our customers’ production efficiency”
Providing sustainability and security of investment: compressed air drying with CO2
Fully redesigned – presenting the new CABflex3
Precise conveyor technology for complex oil spray system
New building enhances flexibility in production
Operating costs reduced and disposal costs eliminated
Lights out, video on!
Innovations in application technology
Ferrari records a higher production output
Balancing crankshafts efficiently and conveniently with BARIO
EcoC-IC oven – for targeted use of heat
Software for paint shops revised
Award for innovative wheel alignment stand x-wheel truck d
For fast, precise interior painting
EcoReBooth saves space while reducing material consumption and costs
New test center for handling doors and hoods
Dürr provides a good basis
x-DASalign – precision and safety
Technologies with excellent energy efficiency
Paint separation – one step ahead
Dürr opens technology center in Tokyo
Dürr rewards its best suppliers
thermea heat pumps for five-star hotel
Dürr receives Daimler Supplier Award
Scania continues to rely on powder paint and Dürr as a partner
Space-saving design and low energy consumption
Precisely balanced for smooth running
Dürr provides network for commercial vehicle community
Faster and more accurate glue application
Environmental protection goes global
New location in Shanghai: service and local product development expanded
One-stop solution designed and built in-house
CIC ovens: the world's first use in truck manufacturing
Cleanliness is a key quality factor for more competitive edge
New chassis geometry measurement system
New expertise for Russian carmakers
Faster commissioning
High demand for innovative paint booth concept
Environmentally friendly refrigerant requires investment
Special design for Amorak as a highlight
From micro gas turbines to heat exchangers
Economical and quick to use
Faster results in cleanliness testing
New machines for the Chinese market
From zero to 100 percent production within just four days
For excellent performance at the VW factory in Puebla
Efficiency results in sustainability
Rethink the idea of a paint booth
A perfectly cleaned and dried surface
Quality, flexibility and profitability guaranteed
Alternative oven heating
Savings in energy consumption of around 80%
Quick and economical application
The EcoCBase W3 covers a wide range of cleaning tasks
A new perspective for sustainable painting
Distec makes small series economically feasible
Optimizing the process chain
Coated in premium quality at reduced unit costs
Simple and efficient cleansing of process bath fluids
Fast fault analysis and speedy troubleshooting
Teaching filling technology know-how all over the world
Efficiency and quality in the painting process
A topic of high priority
EcoCAgile: A new flexible cleaning system for the Chinese market
Further development for FASmotion
Existing energy used more efficiently
New test center for parts cleaning in the USA
Automated gluing and coating of rotor blades
Electricity from waste heat
German engineering – high-quality built in India
Tailored closer to customers' needs
New generation Ecopaint RoDip E
x-wheel truck d goes to America
Innovative, award-winning products by Dürr
High flexibility and short start-up period
Valuable advantages for customers
Dürr in Turkey: Not only painting cars
New robotized cleaning system
Complex logistics and exact planning required
Cost savings in paint usage and maintenance requirements
Fast, reliable and customized
The new generation of solvent-based cleaning systems
Pioneering and outstanding technology
Dürr Somac filling systems for commercial vehicles, too
Dürr acquires environmental technology specialist LTB
Space for robot assembly significantly extended
Automatic interior painting in just nine days
More robots and training rooms
CPM received “Supplier of the Year” award
New test center for cleaning systems
TIIS certification for Dürr robots in Japan
Electro-coating of a different kind
A leap in high-pressure technology
In just four weeks
Flexible, fast, and energy-efficient
Lowering energy costs and emissions
Exploring Dürr innovations

To top