ROxiTHERM permits production in accordance with European standards in Malaysia.

Cutting operating costs and saving resources

Innowo Print uses energy-efficient exhaust-air purification system provided by LTB

Goldkronach, December 2017 – Innowo Print is the market leader in the printing of nonwoven materials for hygiene products and supplies all of the well-known manufacturers in the industry worldwide. In order to make more efficient use of resources during production, the print shop has equipped its German site with a thermal exhaust air purification system with heat recovery. The system from Luft- und Thermotechnik Bayreuth GmbH (LTB) saves the manufacturer around EUR 40,000 in heating costs per year. This means the heat exchanger will have paid for itself within just 1.5 years. The company’s plant in Malaysia also uses LTB exhaust air technology to engage in eco-friendly work practices in accordance with European standards. The environmental technology specialist LTB is part of the Dürr Group. 

The large number of orders received by Innowo Print, a subsidiary of the Danish company Fibertex Personal Care, meant that its existing exhaust-air purification system was full to capacity. “We needed to extend to ensure that the official emission values were met. We wanted a concept that would link the old and new systems so we could use it to control the total volume of exhaust air,” says Albert Steffen, Managing Director of Innowo Print, in explaining the requirements needed.

The solution consists of an exhaust air purification system from LTB based on regenerative thermal oxidation (RTO). The new system is rated for 15,000 Nm3/h of exhaust air. It requires much less energy during continuous operation than the old exhaust air system from a third-party manufacturer and also features heat recovery. The existing pipe network was modified to enable both systems to be serviced from one manifold. The exhaust air volumes are coordinated by a higher-level control system so that both systems operate in their respective optimum operating conditions. This ensures that the old system is operated as cost-effectively as possible, and the new, more efficient RTO is operated at maximum capacity. Although the existing system had been purchased from another manufacturer, LTB carried out this energy-efficient integration.

Making cost-effective use of energy from exhaust air

The solvents used in the printing process release a large amount of energy during the combustion process, which used to be lost as hot exhaust air through the stack at Innowo Print. “Our goal is to minimize environmental pollution along the entire manufacturing process. Our customers also increasingly want to know how we are making our production more resource-efficient. Therefore the new exhaust air purification system combined with heat recovery is not just logical for us, but also cost-effective,” says Steffen.

Innowo Print will spend much less on heating in the future, since the energy recovered from afterburning through a 600 kW hot water heat exchanger will be used for factory air conditioning. With a heating period of 4,000 hours annually, this will reduce the amount of heat required by an average of 250 kW which will no longer need to be purchased as primary energy. This will result in a savings of around EUR 40,000 per year.

In order to be prepared for further growth, the new system including the heat exchanger was designed from the onset in such a way that the exhaust air capacity could be doubled to 30,000 Nm³/h with little technical effort. The LTB unit is designed so that the system can be easily extended within a few days if necessary. This is much faster and less expensive than building a brand new system.

Service for high operational reliability

The reliable availability of exhaust air purification systems is extremely important for the printing industry. “You need an afterburning system to get an operating license for a printing plant of this size. If this system were to fail, we would no longer be able to operate the print shop and would have to shut down the presses,” spells out Steffen.

Dürr offers a comprehensive service package and worldwide support with service centers close to the customer that are also used by the subsidiary LTB. This was an important factor in Innowo Print’s decision to award the contract. LTB has a service team available to the print shop located in Ilsenburg just two hours away in Goldkronach. As well as maintenance and repairs, the service package also includes performance improvements to the systems. This involves analyzing the data recorded by the systems and making appropriate adjustments to the parameters in order to further optimize operating costs.

Demand for printed nonwovens is also growing in Asia. In order to meet this growing demand, Fibertex, Innowo Print’s parent company, built its own plant in Malaysia. Even though it is not a statutory requirement in the South East Asian country, the print shop was equipped with a RTO rated for 20,000 Nm3/h in order to ensure eco-friendly production in accordance with European standards. The project was designed in Germany by Dürr and supported by their subsidiary in Malaysia.

“Our cooperation with LTB was completely professional and purposeful. Preliminary discussions focused on gathering information in order to identify our requirements. LTB then used this information to come up with competent proposals that enabled us to quickly find the right system for us. The project was also completed very promptly,” says Steffen in summarizing the company’s experiences of the two projects.

Your contact: Jan-Filip Lutz

“One united team for our customers”
EcoInCure: A revolution in car body drying
Equipped for the Industry 4.0 environment
Smart, flexible and easy to use
iTAC.MES.Suite – Synergies for the production of the future
Trained employees ensure quality
High-quality modifications
Modular and automated
Energized and ever ready
Tried and tested for many decades
Smart, safe and precise
All about painting, gluing and sealing
The 1,000th EcoBell Cleaner D2 will be Mexican
Keeping high-speed trains looking their best
Big quality for small parts
Cutting operating costs and saving resources
"We combine digitization know-how with industry expertise"
Innovative body drying from the inside
Autonomous driving brings major changes to end-of-line technology
Increased system operation efficiency with digital documentation
Painting processes optimized before the start of production
Reducing cycle times and investment with the right nozzle
Perfectly integrated, process optimized
Optimized emission values and reduced consumption of resources
Dürr wins visionary new product award
Dürr is „Global Champion“
Shop floor meets IT
At the cutting edge of autonomous driving
A unique combination that is ready-to-use
Go and See – Practical relevance is the lifeblood of successful project management
Increasing system availability with smart services
Laser scanning for optimized processes in brownfield projects
Combining skills at one location
Dürr receives Ford Motor Company´s World Excellence Award again
Smart control technology makes new Dürr robots even more powerful and well-prepared for Industry 4.0
Maximum production efficiency in the age of Industry 4.0
Robot supports workers precisely and reliably
First time installation of Dürr’s EcoDry X technology
Integrated balancing solution using laser measuring technology
A paint shop that can fit through a door
Dürr acquires KBA-CleanAir
New generation of robots from Dürr: More versatile painting through additional movement options
Digital maintenance assistant from Dürr increases plant availability
“Digitization has gained great momentum”
New addition to the EcoBell3 family
A focused and accurate detection of flaws with EcoReflect
Tailor-made solutions for dry separation
Intermediate oven with CO2 heat pump: cost-efficient and environment-friendly
Dürr Supplier Award presented for second time
Smart products and networked factories
Smart product: Green: all ok, yellow: maintenance required, red: replace pump immediately
EcoScreen 3D-OnSite: increased performance and speed
Digital fingerprint enables targeted troubleshooting
Optimizing production worldwide
Dürr sells 2,000th sealing robot
Accurate testing for reproducible quality
Dürr opens new US campus
The best customized modification
Thank you for your positive feedback and your ideas!
Reliable tracking in a complex production process
Machine duo impresses in the workshop
Finding the most economical solution together
Faster service for Korean automotive industry
Dürr modernizes paint shop in China in record time
Experiencing and understanding technology
The 10,000th Dürr robot is heading to Spain
x-DASalign ensures safety
Meeting stricter emission standards in China with Dürr's exhaust-air purification systems
EcoShot Meter: a piston dosing system for many types of application
High-speed balancing now also available as a service
Volvo Group Trucks presents Dürr with supplier award
Higher energy efficiency thanks to turbine with optimized compressed-air consumption
Energy on demand for the oven
Human and robot operate directly as colleagues for tank fitting
Dürr test stands increasingly growing in importance – even for “autonomous driving”
Precision work on the ground floor
EcoGun2 3D is more compact and lighter with minimum pressure loss
EcoEMOS SCADA increases the efficiency of the entire production process
Speeding up spare parts delivery
Dürr is on the right track in Russia
Testing the burners of exhaust-air purification systems under live conditions
Three metropolises and huge emotions
Automated water-based paint application: high efficiency in interior painting
Dürr service hotline: competent support 24/7
EcoEMOS Andon supervisory control system optimizes the assembly line in automotive production
CARDANO: ease of operation, fast processes, high process reliability
Dürr creates state-of-the-art paint shop on the Indian market
World’s largest ventilation air methane/coal mine methane oxidation project goes live
Innovation in atomizer cleaning
Producing wheels ready for installation – with high process reliability and maximum flexibility
Dürr EcoEMOS software for all production areas
CO2 refrigerant provides sustainability and security of investment
Dürr presents its "Industrial Products"
Energy and heat from wood-based residues
Dürr selected as strategic partner
State-of-the-art test stand for pumps from Dürr
"Greenfield projects are the 'compulsory' program, while brownfield projects are 'freestyle'"
Always a big step ahead with adapters from Dürr Somac
EcoSupply P: Minimum paint loss through piggable paint supply systems
Dürr offers promising combination
Dürr opens sixth training center for paint systems
Tailor-made: balancing system for roller manufacturing
Dürr creates further testing and training opportunities
One supervisory control system – many functions
First accredited testing laboratory for balancing equipment worldwide
Dürr web shop for "Industrial Products" online
First concentrate, then purify
Thanks to ORC equipment: geothermal power station becomes more efficient
Dürr robots qualify for the Korean market
Dürr sets up new "Industrial Products" area
Perfect alignment prior to final vehicle assembly
Higher efficiency with minimum cleaning
G3 Blue is faster, lighter and more ergonomic
“Dürr´s focus is on increasing our customers’ production efficiency”
Providing sustainability and security of investment: compressed air drying with CO2
Fully redesigned – presenting the new CABflex3
Precise conveyor technology for complex oil spray system
New building enhances flexibility in production
Operating costs reduced and disposal costs eliminated
Lights out, video on!
Innovations in application technology
Ferrari records a higher production output
Balancing crankshafts efficiently and conveniently with BARIO
EcoC-IC oven – for targeted use of heat
Software for paint shops revised
Award for innovative wheel alignment stand x-wheel truck d
For fast, precise interior painting
EcoReBooth saves space while reducing material consumption and costs
New test center for handling doors and hoods
Dürr provides a good basis
x-DASalign – precision and safety
Technologies with excellent energy efficiency
Paint separation – one step ahead
Dürr opens technology center in Tokyo
Dürr rewards its best suppliers
thermea heat pumps for five-star hotel
Dürr receives Daimler Supplier Award
Scania continues to rely on powder paint and Dürr as a partner
Space-saving design and low energy consumption
Precisely balanced for smooth running
Dürr provides network for commercial vehicle community
Faster and more accurate glue application
Environmental protection goes global
New location in Shanghai: service and local product development expanded
One-stop solution designed and built in-house
CIC ovens: the world's first use in truck manufacturing
Cleanliness is a key quality factor for more competitive edge
New chassis geometry measurement system
New expertise for Russian carmakers
Faster commissioning
High demand for innovative paint booth concept
Environmentally friendly refrigerant requires investment
Special design for Amorak as a highlight
From micro gas turbines to heat exchangers
Economical and quick to use
Faster results in cleanliness testing
New machines for the Chinese market
From zero to 100 percent production within just four days
For excellent performance at the VW factory in Puebla
Efficiency results in sustainability
Rethink the idea of a paint booth
A perfectly cleaned and dried surface
Quality, flexibility and profitability guaranteed
Alternative oven heating
Savings in energy consumption of around 80%
Quick and economical application
The EcoCBase W3 covers a wide range of cleaning tasks
A new perspective for sustainable painting
Distec makes small series economically feasible
Optimizing the process chain
Coated in premium quality at reduced unit costs
Simple and efficient cleansing of process bath fluids
Fast fault analysis and speedy troubleshooting
Teaching filling technology know-how all over the world
Efficiency and quality in the painting process
A topic of high priority
EcoCAgile: A new flexible cleaning system for the Chinese market
Further development for FASmotion
Existing energy used more efficiently
New test center for parts cleaning in the USA
Automated gluing and coating of rotor blades
Electricity from waste heat
German engineering – high-quality built in India
Tailored closer to customers' needs
New generation Ecopaint RoDip E
x-wheel truck d goes to America
Innovative, award-winning products by Dürr
High flexibility and short start-up period
Valuable advantages for customers
Dürr in Turkey: Not only painting cars
New robotized cleaning system
Complex logistics and exact planning required
Cost savings in paint usage and maintenance requirements
Fast, reliable and customized
The new generation of solvent-based cleaning systems
Pioneering and outstanding technology
Dürr Somac filling systems for commercial vehicles, too
Dürr acquires environmental technology specialist LTB
Space for robot assembly significantly extended
Automatic interior painting in just nine days
More robots and training rooms
CPM received “Supplier of the Year” award
New test center for cleaning systems
TIIS certification for Dürr robots in Japan
Electro-coating of a different kind
A leap in high-pressure technology
In just four weeks
Flexible, fast, and energy-efficient
Lowering energy costs and emissions
Exploring Dürr innovations

To top