The structure of EcoSupply P, the new paint supply station from Dürr, is standardized and modular. It is capable of being commissioned more quickly and is easier to maintain and service than paint cabinets. This photo shows the 3-in-1-system.

EcoSupply P: Minimum paint loss through piggable paint supply systems

Standardized elements reduce costs – Deployed for a growing number of Dürr customers

Bietigheim-Bissingen, May 2015 – The number of paints used in automotive paint booths has multiplied in recent years. In particular, manufacturers of utility vehicles and plastic paint shops used over 100 different paints and colors. A large number of paints calls for flexible and piggable special paint systems. EcoSupply P ensures efficient workflows: this paint supply system from Dürr has convinced an increasing number of customers thanks to low paint dispersion losses, reduced solvent consumption and very short color change times.

EcoSupply P is a standardized, modular paint supply system featuring pigging technology that can be deployed for water- and solvent-based paint applications. Owing to the increasing variety of paints and colors, not only are special and customer-specific paints applied with the aid of pigging systems, but also small series paints. This has become necessary because only a limited number of paint connections is available on a robot that can be connected to the paint feeder hoses. In a paint booth for different vehicle models or for installation parts produced for a number of customers, however, the number of paints and colors needed can soon exceed the maximum number of 36 paints.

Pigs are lubricated, cylindrical fittings. They are located in the paint hose, where they move the paint in the direction of the atomizer or to the paint container. After applying the paint, they press the residual paint almost completely out of the hoses. They are “pushed” by pressurized air.

Pig systems reduce the consumption of paint and solvents substantially. In view of rising paint prices in the field of special paints and colors, this represents an immense advantage. Accordingly, piggable special paint supply systems pay off on their investment cost very quickly.

The following parameters vary according to the number of robots to be connected: paint dispersion losses: 300 to 700 ml per color change; solvent consumption: 6,000 to 20,000 ml per color change; color change times have been reduced to 15 to 25 seconds per color change.

Dürr has different types of pigging systems in its portfolio for various application types, in which a paint recovery of almost up to 100% is possible:

Basic Main Pass System: a pigging hose is installed on each side of the paint booth. The connection to the robots is mostly not piggable.

Main Pass System: a pigging hose is installed on each side of the paint booth. The connection to the robots is mostly by piggable means.

Single Pass System: each robot is connected to a separate pigging hose. This makes it possible to assign only the required amount of paint to the robot for the painting process. In view of the rising number of special colors and paints, this is becoming increasingly important.

To supply the pigging systems with paint, paint supply stations that can be changed quickly are necessary: The new paint supply station of the EcoSupply P consists of a substantially lower number of construction parts than the fully automatic paint cabinet and therefore is considerably more favorably priced. This structure facilitates faster commissioning and simplifies maintenance and services, with the key data on paint and solvent consumption being identically good.

A further strong point of the EcoSupply P system is its flexibility: its modular structure makes it possible to combine various paint supply units with a capacity ranging from 10 to 500 liters. A common variant is the 2-in-1 system: one supply container for 25 liters, one for 250 liters as well as an integrated stirring plant cleaning station. The customer can also use the 2-in-1 systems with identical container sizes to process special effect paints.

The new paint supply station has been used by Dürr since last year – meanwhile at various locations in Europe and South America. Customers order them both for new paint shops and for facilities to be converted.

This represents the continuation of a success story: in 1999, Dürr commissioned the first special paint supply system at Volvo in Umea (Sweden). Over 370 systems have since been installed.

At present, Dürr has developed a new, universal pigging target station that is even smaller and less complex, ensuring even lower paint dispersion losses within the robot, namely about five milliliters instead of 20 to 40 milliliters per color change. This pigging station will be used for the first time in the production of a transporter in Europe.

Your contact: Harald Pandl

“One united team for our customers”
EcoInCure: A revolution in car body drying
Equipped for the Industry 4.0 environment
Smart, flexible and easy to use
iTAC.MES.Suite – Synergies for the production of the future
Trained employees ensure quality
High-quality modifications
Modular and automated
Energized and ever ready
Tried and tested for many decades
Smart, safe and precise
All about painting, gluing and sealing
The 1,000th EcoBell Cleaner D2 will be Mexican
Keeping high-speed trains looking their best
Big quality for small parts
Cutting operating costs and saving resources
"We combine digitization know-how with industry expertise"
Innovative body drying from the inside
Autonomous driving brings major changes to end-of-line technology
Increased system operation efficiency with digital documentation
Painting processes optimized before the start of production
Reducing cycle times and investment with the right nozzle
Perfectly integrated, process optimized
Optimized emission values and reduced consumption of resources
Dürr wins visionary new product award
Dürr is „Global Champion“
Shop floor meets IT
At the cutting edge of autonomous driving
A unique combination that is ready-to-use
Go and See – Practical relevance is the lifeblood of successful project management
Increasing system availability with smart services
Laser scanning for optimized processes in brownfield projects
Combining skills at one location
Dürr receives Ford Motor Company´s World Excellence Award again
Smart control technology makes new Dürr robots even more powerful and well-prepared for Industry 4.0
Maximum production efficiency in the age of Industry 4.0
Robot supports workers precisely and reliably
First time installation of Dürr’s EcoDry X technology
Integrated balancing solution using laser measuring technology
A paint shop that can fit through a door
Dürr acquires KBA-CleanAir
New generation of robots from Dürr: More versatile painting through additional movement options
Digital maintenance assistant from Dürr increases plant availability
“Digitization has gained great momentum”
New addition to the EcoBell3 family
A focused and accurate detection of flaws with EcoReflect
Tailor-made solutions for dry separation
Intermediate oven with CO2 heat pump: cost-efficient and environment-friendly
Dürr Supplier Award presented for second time
Smart products and networked factories
Smart product: Green: all ok, yellow: maintenance required, red: replace pump immediately
EcoScreen 3D-OnSite: increased performance and speed
Digital fingerprint enables targeted troubleshooting
Optimizing production worldwide
Dürr sells 2,000th sealing robot
Accurate testing for reproducible quality
Dürr opens new US campus
The best customized modification
Thank you for your positive feedback and your ideas!
Reliable tracking in a complex production process
Machine duo impresses in the workshop
Finding the most economical solution together
Faster service for Korean automotive industry
Dürr modernizes paint shop in China in record time
Experiencing and understanding technology
The 10,000th Dürr robot is heading to Spain
x-DASalign ensures safety
Meeting stricter emission standards in China with Dürr's exhaust-air purification systems
EcoShot Meter: a piston dosing system for many types of application
High-speed balancing now also available as a service
Volvo Group Trucks presents Dürr with supplier award
Higher energy efficiency thanks to turbine with optimized compressed-air consumption
Energy on demand for the oven
Human and robot operate directly as colleagues for tank fitting
Dürr test stands increasingly growing in importance – even for “autonomous driving”
Precision work on the ground floor
EcoGun2 3D is more compact and lighter with minimum pressure loss
EcoEMOS SCADA increases the efficiency of the entire production process
Speeding up spare parts delivery
Dürr is on the right track in Russia
Testing the burners of exhaust-air purification systems under live conditions
Three metropolises and huge emotions
Automated water-based paint application: high efficiency in interior painting
Dürr service hotline: competent support 24/7
EcoEMOS Andon supervisory control system optimizes the assembly line in automotive production
CARDANO: ease of operation, fast processes, high process reliability
Dürr creates state-of-the-art paint shop on the Indian market
World’s largest ventilation air methane/coal mine methane oxidation project goes live
Innovation in atomizer cleaning
Producing wheels ready for installation – with high process reliability and maximum flexibility
Dürr EcoEMOS software for all production areas
CO2 refrigerant provides sustainability and security of investment
Dürr presents its "Industrial Products"
Energy and heat from wood-based residues
Dürr selected as strategic partner
State-of-the-art test stand for pumps from Dürr
"Greenfield projects are the 'compulsory' program, while brownfield projects are 'freestyle'"
Always a big step ahead with adapters from Dürr Somac
EcoSupply P: Minimum paint loss through piggable paint supply systems
Dürr offers promising combination
Dürr opens sixth training center for paint systems
Tailor-made: balancing system for roller manufacturing
Dürr creates further testing and training opportunities
One supervisory control system – many functions
First accredited testing laboratory for balancing equipment worldwide
Dürr web shop for "Industrial Products" online
First concentrate, then purify
Thanks to ORC equipment: geothermal power station becomes more efficient
Dürr robots qualify for the Korean market
Dürr sets up new "Industrial Products" area
Perfect alignment prior to final vehicle assembly
Higher efficiency with minimum cleaning
G3 Blue is faster, lighter and more ergonomic
“Dürr´s focus is on increasing our customers’ production efficiency”
Providing sustainability and security of investment: compressed air drying with CO2
Fully redesigned – presenting the new CABflex3
Precise conveyor technology for complex oil spray system
New building enhances flexibility in production
Operating costs reduced and disposal costs eliminated
Lights out, video on!
Innovations in application technology
Ferrari records a higher production output
Balancing crankshafts efficiently and conveniently with BARIO
EcoC-IC oven – for targeted use of heat
Software for paint shops revised
Award for innovative wheel alignment stand x-wheel truck d
For fast, precise interior painting
EcoReBooth saves space while reducing material consumption and costs
New test center for handling doors and hoods
Dürr provides a good basis
x-DASalign – precision and safety
Technologies with excellent energy efficiency
Paint separation – one step ahead
Dürr opens technology center in Tokyo
Dürr rewards its best suppliers
thermea heat pumps for five-star hotel
Dürr receives Daimler Supplier Award
Scania continues to rely on powder paint and Dürr as a partner
Space-saving design and low energy consumption
Precisely balanced for smooth running
Dürr provides network for commercial vehicle community
Faster and more accurate glue application
Environmental protection goes global
New location in Shanghai: service and local product development expanded
One-stop solution designed and built in-house
CIC ovens: the world's first use in truck manufacturing
Cleanliness is a key quality factor for more competitive edge
New chassis geometry measurement system
New expertise for Russian carmakers
Faster commissioning
High demand for innovative paint booth concept
Environmentally friendly refrigerant requires investment
Special design for Amorak as a highlight
From micro gas turbines to heat exchangers
Economical and quick to use
Faster results in cleanliness testing
New machines for the Chinese market
From zero to 100 percent production within just four days
For excellent performance at the VW factory in Puebla
Efficiency results in sustainability
Rethink the idea of a paint booth
A perfectly cleaned and dried surface
Quality, flexibility and profitability guaranteed
Alternative oven heating
Savings in energy consumption of around 80%
Quick and economical application
The EcoCBase W3 covers a wide range of cleaning tasks
A new perspective for sustainable painting
Distec makes small series economically feasible
Optimizing the process chain
Coated in premium quality at reduced unit costs
Simple and efficient cleansing of process bath fluids
Fast fault analysis and speedy troubleshooting
Teaching filling technology know-how all over the world
Efficiency and quality in the painting process
A topic of high priority
EcoCAgile: A new flexible cleaning system for the Chinese market
Further development for FASmotion
Existing energy used more efficiently
New test center for parts cleaning in the USA
Automated gluing and coating of rotor blades
Electricity from waste heat
German engineering – high-quality built in India
Tailored closer to customers' needs
New generation Ecopaint RoDip E
x-wheel truck d goes to America
Innovative, award-winning products by Dürr
High flexibility and short start-up period
Valuable advantages for customers
Dürr in Turkey: Not only painting cars
New robotized cleaning system
Complex logistics and exact planning required
Cost savings in paint usage and maintenance requirements
Fast, reliable and customized
The new generation of solvent-based cleaning systems
Pioneering and outstanding technology
Dürr Somac filling systems for commercial vehicles, too
Dürr acquires environmental technology specialist LTB
Space for robot assembly significantly extended
Automatic interior painting in just nine days
More robots and training rooms
CPM received “Supplier of the Year” award
New test center for cleaning systems
TIIS certification for Dürr robots in Japan
Electro-coating of a different kind
A leap in high-pressure technology
In just four weeks
Flexible, fast, and energy-efficient
Lowering energy costs and emissions
Exploring Dürr innovations

To top